This is if you mind hopefully you can call Henry guys keeping in mind that. There are several models to fit the needs of various radios and manufacturers. Initially adjusted the trap covers with no radials, and had very little shift when 12 40 footers were laid. For the money spent, well worth it. Mast Mounting Clamp Maximum: Scanners Scanner Antennas Scanner Accessories. It didn't take me long to find others who had been on the same quest and a few that solved it.
Your recently viewed items and featured recommendations. I Worked All States on the 3. Initially adjusted the trap covers with no radials, and had very little shift when 12 40 footers were laid. I next located where each hole needed to be, and then I marked each location with a red circle. Usually, this involves some kind of a tilt-over mount that lets the antenna hide behind the house during the day and be erected after dark. A used 6BTV came up on the local market. I am finishing up a review of the AA and expect to have it up on site within a few weeks.
Camden County Amateur Radio Society (Georgia) - CCARS INC.
I already explained about ground radials. The length should be long enough to allow 12" either side of the tube center Option: Ok, one last time - The antenna is really a vertical dipole. Here's one "radio wive's tale" put to rest. Find out more about your rights as a buyer - opens in a new window or tab and exceptions.
I have driven in ground rods before here, and that takes about an hour, six of these would take far longer as I would tire out. You are using an insecure version of your web browser. The Hy-Gain AV antenna boasts of a classic vertical antenna design with improvements. Compare with similar items. I next purchased a set of six pole levelers. The only inconvenience is that I will have 3 lengths of coax running back to the radio and I will have the 12M and 17M antennas connected to an antenna switch.